There are two codes provided: one to open the battery compartment and another to open the big chain lock. Inside the battery compartment, you will find an additional key for the wheel lock. The battery is secured with two locks—one is a padlock, and the other is the battery’s own lock. It is important to note that the key for the wheel lock will not come out unless the wheel is locked.

Once the bike is unlocked and the engine is running, you can adjust the seat. The seat is equipped with a quick-release mechanism. To adjust, open the quick release, set the seat to your preferred height, and then close it again. For better balance, it is recommended to set the seat slightly lower than you would on a regular bike.

To lock the parking brake, press the brakelever and push down on the metal knob, which will lock the lever in place. To unlock the parking brake, press and release the lever.

To make sure the engine is working, turn on the bike by pressing the power button for two to three seconds until the screen lights up. If the screen does not turn on, it could mean that the battery switch is off. You can either remove the battery and manually flip the switch, or reach behind the battery and toggle the switch without removing it.

The engine controller is equipped with several features to assist you during your ride. There are blinking lights that indicate turns, and they can be used alongside hand signals. The bike also has internal lights inside the cargo box. There are external lights for both the front and rear to ensure visibility during low-light conditions. The bike also includes arrows to change the assist level, 7 gears and a horn button.

The bike can be charged either by using the charger plugged directly into the bike or by locating the charger in the battery compartment. Sometimes, the charger may also be stored in the sailor bag, depending on how it was prepared.

Before setting off on a ride, prepare the bike by first removing the rain cover from the cargo box, wrapping it up, and placing it inside the battery compartment. Next, unlock the big chain lock and store it in the sailor bag for later use.

To use the phone holder, begin by unlocking it. Once unlocked, open the holder and place your phone inside. By pressing the middle button on the holder, you can securely close it and lock your phone in place.

The bike comes equipped with a rain cover that is stored in the sailor bag. To use the rain cover, open it and stretch it over the frame of the bike. Once in place, secure the rain cover by closing the straps and fasteners provided.